Kuryakyn X-Tension Highway Peg Mount Review

Kuryakyn X-Tension Highway Peg Mount Review

One of the first modifications I did to my V-Star 1100 Classic “Mistress” was to add some front pegs. At 6’2” I needed a way to stretch out my legs on longer rides. I had really wanted to get some Lindby Custom Linbars, still do, but funds were not available. So I started looking at front pegs to add to my bike to stretch out and rest my tired dogs on.

In researching for front pegs I decided I wanted some that could be folded up out of the way when not in use, rather than the stationary kind. Looking online I ran across the Kuryakyn X-Tension Highway Peg Mounts on the Kuryakyn website. I think I looked there because several other add-ons on my V-Star were from Kuryakyn. I honestly don’t remember where I ordered them from, but I ordered them online from an online store that had a good price. They arrived safely packed in foam peanuts several days after they were ordered.

The Kuryakyn X-Tension Highway Peg Mounts measure 4 ½” long and have a 1 ¼” offset which allows the reach adjustment to be fine tuned for the rider. The metal is really stout and fully chromed. Another feature I really liked was that the actual foot landing pad is thicker on these pegs, not being just a post. This gives the foot more purchase area. The pad is also equipped with floating rubber grip strips. These peg mounts allow for the peg to be folded up when not in use.

Installation is straight forward and required no special tools, just normal SAE sockets or wrenches most folks have in their garage. Here we go again with SAE nuts and bolts for a metric bike. I mounted them right onto the front frame down-tubes. They have to be mounted high enough up that they do not interfere with the operation of the rear brake pedal on the right side and the shifter on the left. Do not forget to use the included locking washers.

The hardest part about installation is getting them mounted evenly from side to side on height and angle. You also have to tighten the bolt at the pivoting point to the right tension so that they will stay up when put up. It probably took less than an hour to install them.

Having an extra place to put your feet on long ride is well worth it. With my backrest on the Corbin seat and my feet up I feel like I am riding a recliner down the freeway. You can use the pegs with the toe or heel of your shoe or boot. Alternatively, you can just rest the whole back of your foot up on top of the peg. This gives you multiple choices on long rides when you need to move around for comfort.

I have not had any issues with the Kuryakyn X-Tension Highway Peg Mounts. I will warn you Chromaholics that it is painstaking to clean the tops of the pegs between the rubber traction inserts. I have found the easiest way is to use the very edge of a soft cleaning towel. You have to go back and forth like you are shining shoes, between the rubber inserts. Torch gives the Kuryakyn X-Tension Highway Peg Mounts a M.M.M. rating of 9.5.

Ride on,
Torch

Bates E02264 5" Defender Tactical Boot Review

Bates E02264 5" Defender Tactical Boot Review

Last fall I needed a pair of new shoes for work. I, of course, wanted a pair that would lend themselves to motorcycle riding as well. I had several requisites in mind, including non skid, oil resistant, slightly above ankle, and of course, Leather for protection. I started looking around at stores for something that would fit the bill, or rather, my foot.

One of my sons kept bragging about a pair of BATES boots that he had purchased on a recommendation from a local LEO, (Law Enforcement Officer). He bragged about how comfortable they were, how well they gripped the floor, and most of all, how light they were. They were lighter than the tennis shoes he used to wear out every other month because they just would not hold up. The Bates Boots were very durable. He purchased his at Academy Sports & Outdoors in Grapevine, Texas.

So one day I found myself at Academy and made it to the shoe section to see what they had and possibly try on some boots. I soon found out they had at least four different styles of Bates to choose from. They had some like my sons, 5” lace ups. They had some steel toe versions, some zip up versions and some composite toe versions. I tried on a few and soon decided I liked the versions that also had the side zipper because it made them soooo much easier to take on and off. I kind of liked the idea of having some extra toe protection so I opted for the 5” Composite Safety Toe Side Zip E02264 and made my purchase.

Here is the description from the Bates website:

The composite safety toes in these hard working boots won’t set off electronic security but definitely will add vital protection to your toes. Made with all non-metallic components, from zippers to speed lace eyelets. Featuring a breathable mesh lining, an ergonomically supportive insole and slip-resistant Ultra-Lites outsole to help prevent on-the-job injuries, these boots are value priced to not hurt your budget either. ASTM F2413-05 Rated.

Specs

Gender: Mens
Type: Boots
Height: 5"
Color: Black
Uppers: Unknown
Outsole: Enforcer Series Ultra-Lites™
Construction: Cement Construction
Toe: Composite Toe
Waterproof: No
Stealth: Yes
Weight: 3.0 lbs. per pair

I will attest to the fact that these boots are very comfortable. It did take a little time to get used to the Composite Safety Toes because of how they felt against my toes. I was not used to having a hard toed boot. These boots are very light weight. My son always told me how he had a hard time getting used to walking in such a light boot, he always wanted to high step. I had the same feeling from time to time. Both the Defenders together weigh about as much as one of my HD Pecos Boots.

The side zippered boots did cost a little more than the ones without, but the convenience is definitely worth it. You can lace the boots up how you like them and just used the zipper to take them on and off. Every few weeks the laces will work a little loose and have to be laced up tighter again. The zipper is probably my favorite feature.

These boots have great traction. I work in an Automotive Service Department and some of the floors are polished and when they are wet it can be extremely treacherous. The slip-resistance of the Bates Tactical boots Ultru-Lites outsole is extremely good. They use cement construction to attach the sole. The lugged sole is very rugged looking and may not work for formal dressing up.

The breathable mesh lining is another great feature. Bates Footwear constructed these boots with sweaty stinky feet like mine in mind. They do not completely stop my feet from sweating; after all I live in Texas. They do, however, keep my feet cooler, which prevents them from sweating as much. These boots breathe well and still do not stink. The trade off is that they are not waterproof.

The only metal on these boots is the zipper pull tab and slider. When zipped up there is a leather tab with hook and loop closure that covers it up so there is no metal showing that might scratch your bike. The tongue is padded and there is a large padded collar around the top which is real nice as well. Comfort is in much supply on these boots.

Soon after I started riding with the Bates boots I did notice one issue. The Composite Safety Toe makes the front of the boot taller than an ordinary boot or shoe. This made it where the boot would no longer fit under my front shifter to up-shift. Fortunately, my V-Star, "Mistress", is equipped with a heel-toe shifter, so I had to learn to start up-shifting with my heel. Now I have gotten so used to up-shifting with my heel I do it all the time no matter what shoes I am wearing.

So far the Bates Boots have held up real well and are proving themselves to be extremely durable. Not only that, they are real comfortable as well. Torch gives them a M.M.M. rating of 9 out of 10.

Ride on,
Torch

Harley Davidson Pecos Motorcycle Boot Review

Harley Davidson Pecos Motorcycle Boot Review

When I was getting geared up for the Motorcycle Safety Foundations Basic Rider Course I was looking for a black biker boot that looked more like a cowboy boot than the regular bikers engineer boot. One day at lunch I was browsing a local bike shop in Grapevine Texas called Biker Alley, which has since closed, and found what I was looking for. They were Harley Davidson brand and were a cross between an engineer boot and a cowboy boot. The price was reasonable and I purchased a pair.

The boots looked great but after wearing for several hours in the rain they became soaked and my feet were all wet. So, I went looking for something to make then more water repellent. I picked up a can of Penguin brand Himalaya Wax and coated them excessively. Then I polished them up to a beautiful black leather shine. Himalaya Wax is made of beeswax and is very water repellant. My feet have been dry since, however I have not had them immersed in water for any great length of time.

I have had the Pecos boots now for over a year and they have held up well. I do not wear them every day. Usually I wear them on Fridays, on days that are raining, or when it looks like it might rain. The leather has held up well, even the top of the left one, used for up shifting. They have picked up some minor scuffs, but do not look that bad for not having polished them again. For sturdiness and protection these boots are equipped with an inside metal support shank.

The Harley Davidson boots are as comfortable to wear as any good quality made boot should be. Rumor has it that Wolverine manufactures these boots for Harley. There is a metal insignia plate with the Harley Davidson Logo on it located on each heel. The tooled leather straps with steel harness hoop are riveted together. As a nice touch Harley Davidson Motor Co written around the head of each rivet. The uppers are constructed of supple full grain leather. The stitching is of good quality and the pull tabs have lasted with me using them to pull and tug the boots on every time I wear them.

The soles of the Harley Pecos boots are made of Goodyear welted construction. A Goodyear welt construction is good for water protection and the possibility of resoling. The Dual-density rubber/EVA outsole is oil, water, and slip resistant. The traction of the Pecos boot is good on cement and blacktop roads, but get them on wet painted or polished smooth cement and they are not so slip resistant. Part of the tread pattern is bright orange in color and is very aggressive. The Harley Davidson logo is embossed on the sole shank towards the heel. There are parts of the sole that are starting to wear smooth from all my walking and riding in them.

The interior of the Pecos boot is lined with a full length cushion sock made of Taibrelle. This liner helps wick perspiration away from your feet. The insole is removable and is made of dual-density polyurethane for comfort. These boots are very comfortable to wear, but may take some time to get used too if you have never worn boots with a true heel on them.

If you enjoy wearing a comfortable pair of cowboy boots but want something to ride your motorcycle in, these boots fit the bill. I have enjoyed wearing and riding in these boots. They offer a lot of protection for your feet, ankles, shins, and calves. Torch gives the Harley Davidson Pecos Motorcycle Boots a M.M.M Rating of 8 on a scale of 1-10.

Ride on,
Torch